HR4143
Product Number：HR4143HR4143 is a TIRIS Proximity Tag Controller and four-antenna expansion module designed for use with the HR4142. It is suitable for expanding and integrating multi-point RFID read/write systems. The HR4143 provides an RS-485 communication interface and supports SEMI SECS-I, SECS-II, and HSMS Protocols.
-
Power Supply: DC 10 or 24V (±10%), average 120mA and peak 220mA at 24VDC
-
Frequency: 134.2 kHz FSK, supports TIRIS single-page and multi-page tags
-
Environment: Operating temperature -10 ~ +70°C, operating humidity 10 ~ 85% RH
-
Communication: RS-485, supports SECS-I / SECS-II Protocol
-
Construction: Four-antenna interface design, weight 550g MAX., dimensions 183.4×134×31.5 mm, secured with two M4 screws
-
Applications: Industrial automation, asset tracking, logistics management
General Specifications
| Characteristic | Specification | Comment |
| Supply Voltage Range | DC 10 or 24V (+/-10%) | Supplied from the power terminals |
| Current consumption @24VDC | Average 120mA ; Peak 220mA | |
| Transmitting Radio Frequency | Typical 134.2KHz | FSK |
| Transponder Type | TIRIS Tag | Single & Multi page Transponder |
| Operating ambient temperature | -10 ~ +70°C | No freezing |
| Operating ambient humidity | 10 ~ 85% RH | No dew condensation |
| Storage ambient temperature | -20 ~ +85°C | No freezing |
| Storage ambient humidity | 5 ~ 95% RH | No dew condensation |
| Communication interface | RS485 | |
| Weight | 550g, Max. | No freezing |
| Dimensions | 183.4 × 134 × 31.5 mm | Except for protrusions on connectors |
| Mounting system | Secured with two M4 screws. | Use the enclosed washers. |
Communication Interface Specification
| Characteristic | Specification |
| Connector specification | RJ45 connector plug |
| Communication standard | RS485 |
| Synchronization | Asynchronous mode, start-stop synchronization |
| Communications control standard | SEMI SECS-I / SECS-II Protocol |
| Support SEMI standard | SEMI E4, E5, E99 |
| Error control | FCS (Frame Check Sequence) |
