HR4143
商品編號：HR4143HR4143 是一款 TIRIS Proximity Tag Controller 讀寫控制器，4天線擴充模組，搭配HR4142使用，適合多點 RFID 讀寫系統擴充與整合。提供 RS-485 通訊介面，支援 SEMI SECS-I、SECS-II 及 HSMS Protocol
-
電源：DC 10 or 24V（±10%），24VDC 時平均 120mA、峰值 220mA
-
頻率：134.2KHz FSK，支援 TIRIS 單頁與多頁標籤
-
環境：操作溫度 -10 ~ +70°C，操作濕度 10 ~ 85% RH
-
通訊：RS-485，支援 SECS-I / SECS-II Protocol
-
構造：4 天線介面設計，重量 550g MAX.，尺寸 183.4×134×31.5 mm，使用兩顆 M4 螺絲固定
-
應用：工業自動化、資產追蹤、物流管理
產品一般規格 (General Specifications)
| Characteristic | Specification | Comment |
| Supply Voltage Range | DC 10 or 24V (+/-10%) | Supplied from the power terminals |
| Current consumption @24VDC | Average 120mA ; Peak 220mA | |
| Transmitting Radio Frequency | Typical 134.2KHz | FSK |
| Transponder Type | TIRIS Tag | Single & Multi page Transponder |
| Operating ambient temperature | -10 ~ +70°C | No freezing |
| Operating ambient humidity | 10 ~ 85% RH | No dew condensation |
| Storage ambient temperature | -20 ~ +85°C | No freezing |
| Storage ambient humidity | 5 ~ 95% RH | No dew condensation |
| Communication interface | RS485 | |
| Weight | 550g, Max. | No freezing |
| Dimensions | 183.4 × 134 × 31.5 mm | Except for protrusions on connectors |
| Mounting system | Secured with two M4 screws. | Use the enclosed washers. |
通信介面規格 (Communication Interface Specification)
| Characteristic | Specification |
| Connector specification | RJ45 connector plug |
| Communication standard | RS485 |
| Synchronization | Asynchronous mode, start-stop synchronization |
| Communications control standard | SEMI SECS-I / SECS-II Protocol |
| Support SEMI standard | SEMI E4, E5, E99 |
| Error control | FCS (Frame Check Sequence) |
